Marble And Black Dining Table
Marble and Black Dining Table
Color: Black, Calacatta Black with white veining
Size: 200 x 100 x 75 cm, 240 x 100 x 75 cm, customized
Thickness: 20 mm standard, 30 mm on request
Finished: Polished, honed, leathered
Base: Black stone legs or sculpted pedestal
Application: Dining room, hotel, apartment, villa
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Marble and black dining table work from YoYo Stone is cut from Calacatta Black, a black marble carrying white and pale gold veining, and built either on black stone legs or on a sculpted pedestal. The stone is a calcite marble, so the veins that make the pattern are also the planes the material prefers to break along, and the vein run is therefore mapped onto the top before the perimeter is cut. On a rectangular top the base decides where the chairs go, and that is the part of a brief most often settled too late. Legs set 40 cm in from each end leave the long side free and make both end seats usable; the same legs pushed out to the corners cost one place setting per side. A central pedestal clears the sides completely and takes away knee room at the corners, so a 200x100 top on a pedestal seats six in comfort and eight only with armless chairs at the ends. Flatness matters more on this stone than on a white marble, because a polished black face behaves as a mirror and a 1 mm bow reads as a broken reflection line where the top meets the base.
Products Description
| Parameter | Specification |
|---|---|
| Product Name | Marble and black dining table, rectangular; also listed as a black marble dining table rectangle. |
| Material & Brand | Calacatta Black marble by YoYo Stone, a black calcite marble with white and pale gold veining. |
| Origin | Fujian, China. |
| Standard Sizes | 200x100x75 cm and 240x100x75 cm; other sizes cut to your drawing. |
| Seating Capacity | Eight nominal; the leg or pedestal position decides the real count, not the top length. |
| Shape & Style | Rectangle, modern appearance; other shapes on request. |
| Top Thickness | 20 mm standard; 30 mm and 40 mm on request. |
| Edge Profile | Eased, bevel, full bullnose, ogee and laminated; straight or mitred section. |
| Base Options | Black stone legs, twin slab legs or a sculpted pedestal, in matching stone. |
| Mounting | Threaded metal inserts set into the underside to your base template. |
| Under-Side Reinforcement | Fibre mesh bonded with epoxy resin to the unpolished underside. |
| Surface Finish | Polished as standard; honed and leathered on request. |
| Sealing | Penetrating sealer applied at the works and water-drop tested before packing. |
| Water Absorption | 0.10-0.30 % by mass, reference value; sealing is the control, not a claim of impermeability. |
| Density | About 2.7 g/cm3, reference value for a calcite marble of this class. |
| Flatness & Polish | Top face within 1 mm over 1 m, checked on a surface plate; polished face at 90 gloss and above. |
| Product Type & Use | Dining room furniture and home furniture for dining rooms, hotels, apartments and villas. |
| Eco & Customization | Eco-friendly finish system with documentation on request; frame not folded; minor, drawing-based, sample-based and full customization. |
| MOQ & Lead Time | MOQ 1 set; 30 days for 1 to 200 sets, above that to be agreed. |
| Packing | Foam-wrapped tops and bases in braced ISPM 15 fumigated crates, A-framed or flat. |
Products Description
Quality Control & Inspection Standards
Vein mapping and perimeter cut
The vein run is mapped onto the top before the perimeter is cut, and the long edges are kept clear of a heavy vein so a break plane does not run into the arris. Tops wider than 1 m are cut from one slab, never pieced.
Underside reinforcement
Fibre mesh is bonded to the unpolished underside with epoxy resin and roller-pressed so there is no trapped air and no unbonded patch. Coverage is confirmed across the full footprint, including under the leg or pedestal bearing points.
Insert positions and base dry-fit
Threaded inserts are set to your base template on every marble and black dining table, then the base is dry-assembled on the bench and checked for alignment before the top is polished a second time. Nothing is drilled on site, because a chip at an insert is unrepairable.
Flatness, polish and crating
The face is checked to 1 mm over 1 m on a surface plate and read at 90 gloss and above under grazing light. Tops travel foam-wrapped inside braced, ISPM 15 fumigated crates with the bases crated separately.
Products Description
Typical Project & Application Scenarios
Villa and apartment dining rooms
Custom-sized marble dining tables paired with sleek black legs or a central pedestal, tailored to seat six to eight guests. Rather than relying on standard catalog dimensions, every table is scaled to match the specific proportions and spatial flow of the room.
The top thickness, edge profile (such as bullnose, chamfer, or square), and base placement are deliberately specified against the seating plan to optimize legroom, clearance, and visual balance within private luxury residences.
Hotel dining rooms and suites
Repeated black marble rectangular dining tables engineered for high-end hotel suites and restaurant floors. To maintain complete visual harmony across a multi-room or multi-phase refurbishment, every table top is cut from the same block group.
This guarantees consistent veining patterns, background tone, and surface texture, ensuring the entire production run reads as a single, cohesive design specification throughout the property.
FAQ
Frequently Asked Questions
How many chairs does a 200x100 marble and black dining table actually seat?
+
-
It depends on the base, not the top. Legs set in from the corners leave the long sides free and make eight workable. A central pedestal opens the sides but takes the corner knee room, so six sit comfortably and eight need armless chairs.
Does a polished black marble top show scratches, water marks and fingerprints?
+
-
It shows them more than a honed face, because a mirror finish has nothing to hide behind. That is a maintenance decision, not a defect. A penetrating sealer is applied at the works and rarely resealed on site for light domestic use.
Can we use metal black legs instead of stone ones?
+
-
Yes, provided the insert positions are set at the works. A steel spider or plate is bonded and bolted into the reinforced underside, and we need the leg drawing before the top is cut. Stone legs ship in the same crate.
What does a Calacatta Black marble table top weigh, and how does it load?
+
-
A 200x100 cm top is about 108 kg at 20 mm and 162 kg at 30 mm, before the base. A 20 ft container takes roughly 25 to 30 crated sets of this size, and the load plan is issued per order.
What is the minimum order, lead time and customization level on this table?
+
-
One set is the minimum, so a single table can be approved before a project order. Lead time is 30 days for 1 to 200 sets, and we work from minor adjustments through drawing-based and sample-based up to full customization, whichever the project needs.
Hot Tags: marble and black dining table, China marble and black dining table manufacturers, suppliers, factory
