Home / Products / Marble / Chinese Marble / Content

Products

Wooden White Marble Tile

Wooden White Marble Tile
Color: White Background with Grey-Beige Linear Wood Grain
Size: 600×600 mm, 600×300 mm, Gangsaw Slabs, or Cut-to-Size
Finished: Polished (90+ GU), Honed, Brushed, Sandblasted
Application: Interior Flooring, Bathroom Wall & Floor, Feature Facades

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

white-wood-grain-marble-slab-clean-background

White wooden marble tile is a natural calcitic stone quarried from regional sedimentary deposits in Guizhou Province, China. Celebrated in architectural design for its straight horizontal banding, white wood marble replicates the linear warmth of natural timber while delivering the structural permanence and fire resistance of metamorphic rock.

Operating as an established China stone factory, Xiamen YoYo Stone extracts select first-choice blocks to maintain uniform background whiteness, dense grey-beige linear strata, and minimal crystal line occurrences. Our processing plant operates diamond-wire gang saws, multi-head polishing lines, and automated infrared bridge cutters to fabricate gangsaw slabs and factory-customized architectural formats. We specialize in volume orders of white marble tiles 600x600, cut-to-size wall cladding, and anti-slip honed pavers. With stable raw block reserves and digital dry-lay scanning, we ensure color consistency and vein alignment across multi-container shipments for international developments.

Technical Dimension	Testing Method & Standard Requirements
Material Name	Wooden White Marble (White Wood Grain, Serpeggiante White, Guizhou White Wood)
Petrographic Category	Natural Calcitic Marble / Sedimentary Crystalline Limestone
Bulk Density	2.68 – 2.72 g/cm³
Water Absorption Rate	0.22% – 0.35% (Before penetrating chemical sealing)
Compressive Strength	115 – 135 MPa (Dry condition) / 95 – 110 MPa (Wet condition)
Flexural Strength	10.5 – 13.8 MPa
Mohs Surface Hardness	3.5 – 4.0
Standard Gangsaw Slabs	2400up × 1200up mm, 2600up × 1500up mm (Thickness: 16 mm, 18 mm, 20 mm, 30 mm)
Standard Tile Sizes	300 × 300 mm, 600 × 300 mm, 600 × 600 mm, 800 × 800 mm, 900 × 600 mm
Calibrated Thin Tiles	305 × 305 × 10 mm, 610 × 305 × 10 mm (Tolerance: ±0.5 mm)
Dimensional Cutting Tolerance	Length & Width: ±0.5 mm; Thickness: ±0.5 mm; Diagonal: ±1.0 mm
Available Surface Finishes	Mirror Polished (90+ GU), Honed (Matte 25–35 GU), Brushed (Antique), Sandblasted.
Cutting Orientation	Vein-Cut (Linear parallel wood grain) / Cross-Cut (Wavy cloudy pattern)
Backing Reinforcement	High-tensile fiberglass mesh with low-viscosity non-yellowing epoxy resin
Packaging Standard	ISPM-15 heat-treated, fumigated solid wooden crates with corner foam buffer blocks
Loading Port	Xiamen Port, China

Quality Standards

Quality Control & Inspection Standards

YoYo Stone enforces a rigorous six-stage quality verification protocol for every commercial production run of white marble:

Raw Block Stratum Sorting

Quarry blocks are checked for natural crystal spots, irregular color patches, and vein distortion to ensure single-direction linear flow before gangsaw slicing.

Infrared Dimensional Calibration

Computerized bridge saws cut slabs to specified schedules, holding length, width, and thickness tolerances within ±0.5 mm±0.5 mm to ensure straight joint lines during installation.

Resin & Back-Mesh Curing

All slabs receive high-tensile fiberglass reinforcement coated with alkali-resistant epoxy resin, dried in temperature-controlled curing chambers to prevent structural delamination.

Digital Dry-Lay Vein Sequencing

Finished tiles are laid out across our dry-lay floor to match vein direction, balance shade transitions, and assign sequential alphanumeric codes corresponding to project CAD floor plans.

Fumigated Crating & Moisture Isolation

Tiles are bundled with plastic face protectors, separated by foam strips, and secured into heavy-duty fumigated wooden crates banded with galvanized steel strips.

Products Application

Typical Project & Application Scenarios

Interior Flooring & Luxury Living Room Paving

Vein-cut white wood marble tiles deliver a structured, neutral visual base for high-traffic hotel lobbies, luxury residential corridors, and commercial corporate suites. Sawn to precision squareness, these tiles facilitate narrow 1.5–2.0 mm grout lines that create a continuous linear ground aesthetic.

Commercial Restrooms & Master Bathroom Suites

Specified for wet interior zones, white marble floor tiles in bathroom layouts utilize honed or fine-brushed slip-resistant textures on shower pans, paired with polished wall claddings. Factory-applied penetrating sealers block soapy water ingress and cosmetic mineral staining.

Accent Feature Walls & Elevator Lobbies

Fabricated with book-matched or continuous-vein gangsaw slabs, this material serves as vertical architectural paneling for reception desks, feature fireplace surrounds, and executive office walls. Slabs are engineered with back-anchor kerfs for mechanical dry-hanging.

Sheltered Terraces & Covered Loggias

Sandblasted or flamed-brushed finishes transform the stone for sheltered exterior installations, functioning as white marble outdoor tiles across covered balconies, verandas, and luxury villa walkways where slip resistance and light reflectivity are required.

FAQ

Everything You Want To Know

01. How do you prevent noticeable color variation when ordering large volumes of white wood marble?

We allocate blocks extracted from the same quarry layer for single-contract production. Before crating, all cut tiles undergo factory dry-lay sequencing under daylight-calibrated lighting, grouping matching shades into numbered sub-crates with layout maps to ensure smooth color transitions across floor zones.

02. Is wooden white marble suitable for bathroom floors, and how is water seepage prevented?

Yes. When installed as bathroom flooring, we recommend a fine-honed finish for traction. Installers must apply a deep-penetrating siloxane water-repellent impregnator to all six sides before laying, sealing micro-capillaries to stop water ingress, moisture darkening, and alkali efflorescence from the bedding mortar.

03. What is the structural difference between vein-cut and cross-cut 个white marble?

Vein-cut slabs are sawn parallel to natural sedimentary bed lines, displaying crisp, horizontal wood-grain strata with higher tensile strength along the grain. Cross-cut slabs are sawn perpendicular to the bedding plane, revealing soft, cloudy formations with lower directional grain patterns.

04. How does your factory prevent tile breakage and corner chipping during sea container shipment?

Individual tiles are packed with plastic foam separation sheets, shrink-wrapped in sets, and packed inside 20mm solid timber crates lined with high-density polyfoam. Crates feature diagonal timber corner gussets and are strapped with galvanized steel bands, designed for heavy-duty sea transport without in-transit shifting.

05. Can white wood marble be calibrated for narrow 1.5mm architectural grout installations?

Yes. Our infrared bridge saws maintain dimensional tolerances of ±0.5 mm±0.5 mm on length, width, and thickness, with diagonal squareness verified by digital calipers. This precision allows commercial contractors to lay tiles with ultra-narrow 1.5mm joints without uneven lippage or line deviation.

Natural-Stone-01